Nama Lengkap: Prof. Dr. Ir. Han Ay Lie, M. Eng.
NIP: 1956110919850320
Tempat/Tanggal Lahir: Semarang, 9 November 1956
Jenis Kelamin: Perempuan
Jabatan Akademik: Profesor/Guru Besar Departemen Teknik Sipil (TMT 1 April 2017) :
Pangkat/Golongan: Pembina Utama Muda / IV D
Unt Kerja: Departemen Teknik Sipil Fakultas Teknik Universitas Diponegoro
Alamat Kantor: JI. Prof. Soedarto, SH, Tembalang, Semarang 50275, Telp: 024–7474770
Email: hanaylie@hcenet.nl
Alamat Rumah: JI. Bukit Ganda 11, Semarang, Jawa Tengah – Indonesia : 024-7472498 / 081 128 0424.
Website Pribadi: https://hanaylie.id/

Riwayat Pendidikan:
1. SD St. Fransiscus, Rijswijk-Nederland 1965.
2. Sekolah Cor Yesu Semarang 1969.
3. SMP Maria Mediatrix- Semarang 1972.
4. SMA Loyola II Sedes Sapientiae, Semarang 1975.
5. S1 Teknik Sipil Universitas Diponegoro, Semarang 1982
6. S2 Manitoba University, Winnipeg-Canada
7. S3 Universitas Diponegoro, Joint research dengan The National University of Singapore (NUS) dan North Carolina State University (NCSU), USA 2013.
8. Post Doctor, TU Delft The Netherlands 2014.

Profile Akademik dan Website

Professional

OrganizationFunctionSince
American Concrete Institute ACIMember1990
Indonesia Construction Association (HAKI)Member and Board2006
fib-CEB InternationalCommission 7 Sustainable Concrete, Member2015
fib-IndonesiaChair2017
Indonesian standardfor Concrete and FRPMember2018
Indonesian Code on Seismic Evaluation and RetrofittingAdvisory Board2021

Research Interest

  • Retrofitting and external reinforcing
  • Modeling and Finite Element Analyses

Scientific Committees/Reviewer/Editor

Editor/Reviewer
ACI Structural and Materials Journals (https://www.concrete.org/publications.aspx)
AITI-Advances in Technology Innovation (http://ojs.imeti.org/index.php/AITI)
CED (http://ced.petra.ac.id/)
CHROME Journal (http://journal.unika.ac.id/index.php/chrome)
GEOMATE (https://www.geomatejournal.com/)
IJETI Journal (http://ijeti.imeti.org/)
IRECE (https://www.praiseworthyprize.org/jsm/index.php?journal=irece)
JESTEC (http://jestec.taylors.edu.my/)
Malaysian Construction Research Journal (https://www.cream.my/main/index.php)
MKTS journal (https://ejournal.undip.ac.id/index.php/mkts)
Structures (https://www.journals.elsevier.com/structures)
UTM JurnalTeknologi (https://jurnalteknologi.utm.my/index.php/jurnalteknologi)

External Examiner/Advisor

Institution/UniversityFunction
Ph.D. Program, Department of Civil Engineering,National Cheng Kung University, TaiwanCo-Advisor
Master Program, Department of Civil and Disaster Prevention Engineering, National United University, TaiwanCo-Advisor
Degree of Master of Science, Department of Civil Engineering, National Cheng Kung University, TaiwanExaminer
PhDTU Delft Graduate School, The NetherlandsExaminer
Degree of Doctor of Philosophy, Curtin University, AustraliaExaminer

Penghargaan:

  1. Satyalancana Karya Satya X Tahun 2003 Tgl. 20 Sept 2003 SK Presiden RI No. 004/TK/Tahun 2009
  2. Satyalancana Karya Satya XX Tahun 2009 Tgl. 20 April 2009
  3. Penghargaan Pengabdian 25 Tahun SK Rektor UNDIP kepada Universitas Diponegoro 2010 No. 2318/H7.P/KP/2010

Publikasi/Publications

  1. Purwanto; Januarti Jaya Ekaputri; Nuroji; Bobby Rio Indriyantho; Aylie Han; Buntara Sthenly Gan, 2022, “Shear-bond behavior of self-compacting geopolymer concrete to conventional concrete”. Construction and Building Materials, 321 (126167), pp. 1-10, 2022.
  2. Purwanto; Aylie Han;Januarti Jaya Ekaputri; Nuroji; Blinka H. Prasetya, 2021, “Self-Compacting-Geopolymer-Concrete (SCGC) Retrofitted Haunch”, International Journal on Engineering Applications (I.R.E.A.), Vol. 9, N. 4, pp 180-189
  3. Haryanto, Y., Hu, H.T., Han, A. L., Hsiao, F.P., Teng, C.J., Hidayat, B. A.,Wariyatno, N.G., 2021, “Negative moment region flexural strengthening system of RC T-beams with half-embedded NSM FRP rods: a parametric analytical approach”,Journal of the Chinese Institute of Engineers, Vol. 44(6), Pp. 553-561. https://doi.org/10.1080/02533839.2021.1936646
  4. Wariyatno, N.G., Han A. L., Hsiao, F. P.,Gan, B. S., 2021, “Design Philosophy for Buildings’ Comfort-Level Performance”, Advances in Technology Innovation, Vol. 6(3), Pp. 157-168. https://doi.org/10.46604/aiti.2021.7309
  5. Hidayat, B. A., Hu, H. T., Hsiao, F. P., Han A. L., Sosa, L., Chan, L. Y., Haryanto, Y., 2021, “Seismic behavior and failure modes of non-ductile three-story reinforced concrete structure: A numerical investigation”, Computers and Concrete, Vol. 27(5), Pp. 457-472 http://dx.doi.org/10.12989/cac.2021.27.5.457
  6. Haryanto, Y., Hu, H.-T., Han, A. L., Hsiao, F.-P., Teng, C.-J., Hidayat, B. A., Nugroho, L., 2021, “Nonlinear 3D Model of Double Shear Lap Tests for the Bond of Near-surface Mounted FRP Rods in Concrete Considering Different Embedment Depth”,Periodica Polytechnica Civil Engineering, Pp. 1-12. https://doi.org/10.3311/PPci.17309
  7. Haryanto, Y.,Han, A. L.,Hu, H.-T., Hsiao, F.-P., Hidayat, B. A&Widyaningrum, A., 2021, “Enhancement of flexural performance of RC beams with steel wire rope by external strengthening technique”, Journal of the Chinese Institute of Engineers, Vol. 44(3), Pp. 93-203. https://doi.org/10.1080/02533839.2021.1871651
  8. Haryanto, Y., Wariyatno, N.G., Hu, H. T.,Han A. LHidayat, B. A., 2021, “Investigation on Structural Behaviour of Bamboo Reinforced Concrete Slabs under Concentrated Load”, Journal of Sains Malaysiana (SCI), Vol. 50(1), Pp. 227-238. http://dx.doi.org/10.17576/jsm-2021-5001-22
  9. Maryoto, A., Han. A. L., Jonkers, H. M., 2021, “Flexural Strength of Concrete-Galvalume Composite Beam Under Elevated Temperatures”, Computers and Concrete, Vol. 27(1), Pp. 13-20.
  10. Haryanto, Y., Hu, H. T.,Han A. L, Hsiao, F. -P., Wariyatno, N.G., Hidayat, B. A., 2021,“Numerical parametric study on the flexural capacity of reinforced concrete beams strengthened with non-metallic materials”, Journal of Engineering Science and Technology, Vol. 16(4), Pp. 3295 – 3311.
  11. Haryanto, Y., Hu, H. -T., Han. A. L., Hsiao, F. P., Teng, C. J., Hidayat, B. A., Nugroho, L., 2021, “Numerical investigation on RC T-beams strengthened in the negative moment region using NSM FRP rods at various depth of embedment”, Computers and Concrete, Vol. 28(4), Pp. 347-360. https://doi.org/10.12989/cac.2021.28.4.347
  12. Triwiyono, A., Han, A. L., Aryanto, A., Tudjono, S., Gan, B. S., 2020, “Effect of Specimen Gauge Reduction on Uniaxial Tension Properties of Reinforcing Steel”, Journal of Iron and Steel Research International, Vol. 27(8), Pp. 964-971. https://doi.org/10.1007/s42243-020-00458-1
  13. Hidayat, B. A., Hu, H. T., Hsiao, F. P., Han A. L., Pita, P., & Haryanto, Y., 2020, “Seismic Performance of Non-Ductile Detailing RC Frames: An Experimental Investigation”, Earthquakes and Structures, Vol. 19(6), Pp. 485-498 http://dx.doi.org/10.12989/eas.2020.19.6.485
  14. Anggoro, P. W., Anthony, A.A., Tauviqirrahman, M., Jamari., Bayuseno, A. P., Han, A. L., 2020, “Machining Parameter Optimization of EVA Foam Orthotic Shoe Insoles”, International Journal of Engineering and Technology, Vol. 10(3), Pp. 179-190. https://doi.org/10.46604/ijeti.2020.5099
  15. Nuroji., Hung, C.C., Prasetya, B. H., Han, A. L., 2020, “The Behavior of Reinforced Concrete Members with Section Enlargement Using Self-Compacting Concrete”, International Review of Civil Engineering, Vol. 11(3), Pp. 121-126. https://doi.org/10.15866/irece.v11i3.18574
  16. Haryanto, Y., Hu, H.-T.,Lie, H. A., Atmajayanti, A. T., Galuh, D. L. C., Hidayat, B. A., 2019, “Finite element analysis of T-section RC beams strengthened by wire rope in the negative moment region with an addition of steel rebar at the compression block”, JurnalTeknologi, Vol. 81(4), Pp. 143-154. https://doi.org/10.11113/jt.v81.12974

Scopus Indexed Proceedings

  1. Wariyatno, N.G., Haryanto, Y., Han, A.L., Gan, B.S., Sudibyo, G.H., 2020, “Load-carrying capacity and failure mode of composite steel-concrete truss element under monotonic loading”, IOP Conference Series: Materials Science and Engineering, Vol. 982(1), Pp. 1-6. https://doi.org/10.1088/1757-899X/982/1/012032
  2. Qomaruddin, M., Han A. L., Hidayat, A., Sudarno., Kustirini, A., 2019, “Compressive Strength Analysis on Geopolymer Paving by Using Waste Substitution of Carbide Waste and Fly Ash”, Journal of Physics: Conference Series, Vol. 1424, Pp. 1-6. https://doi.org/10.1088/1742-6596/1424/1/012052
  3. Han, A. L., Setiawan, H., Hajek, P., 2019, “Laboratory Concrete Specimens Waste, a Case Study on Life Cycle Assessment”, IOP Conference Series: Earth and Environmental Science, Vol. 290(1), Pp.1-7. https://doi.org/10.1088/1755-1315/290/1/012015

Accredited Journal

  1. Utomo,J.,Khusyeni, M. N., Partono, W., Han, A. L., Gan, B. S., 2021,“Experimental Investigation on the Failure Behavior of Carbon Fiber Reinforced Polymer (CFRP) Strengthened Reinforced Concrete T-beams”, Civil Engineering Dimension, Vol. 23(2), Pp. 115-122. https://doi.org/10.9744/ced.23.2.115-122
  2. Utomo, J., Rabbani, N., Tudjono, S., Han, A. L., Sukamta., 2021, “The Influence of External CFRP String Reinforcement on The Behavior of Flexural RC Elements”, Journal of Geoscience, Engineering, Environment, and Technology,Vol. 6(3), Pp. 141-146. DOI: 10.25299/jgeet.2021.6.3.5685
  3. Nuroji., Asshidiqie, M. R., Sukamta., Han, A. L., 2021, “Pengembangan Alat Simulasi Model Numeris Elemen Beton Bertulang dengan Respon Geser dan Lentur Tinggi”, Teknik,Vol. 42(2), Pp. 106–116. https://doi.org/10.14710/teknik.v42i2.3268
  4. Lie, H. A.,Utomo, J., Hu, H.-T., & Lestari, L. T., 2021, “Seismic Retrofitting of Irregular Pre-80s Low-rise Conventional RC Building Structures”, Civil Engineering Dimension, Vol. 23(1), Pp. 9-19. https://doi.org/10.9744/ced.23.1.9-19
  5. Adi, R. Y. Rizqi, S. Y., Subagyo, S. A. P., &Han A. L.,2021., “PengaruhSubstitusi Semen dengan Semen Slag pada Mortar terhadapKebutuhan Air dan Waktu Ikat, dan PeningkatanKuatTekan Mortar pada Umur 14 hari dan 28 Hari,” Media Komunikasi Teknik Sipil, Vol. 26(2), Pp. 204-211. https://doi.org/10.14710/mkts.v26i2.31691
  6. Setiadji, B. H., Dewabrata, H., Ay Lie, H., &Subagyo, S. A. P., 2020, “StudiPenggunaan Semen Slag sebagaiSubstitusi Semen Portland pada Beton”. Siklus : Jurnal Teknik Sipil, Vol. 6(2), Pp. 117 – 128. https://doi.org/10.31849/siklus.v6i2.4595
  7. Setiawan, H., Raharjo, F., &Han, A.L., 2020, “An Innovation Value Chain in Project Based Companies: A Study of Indonesian Contractors”, Civil Engineering Dimension, Vol. 22(2), Pp.101-108. https://doi.org/10.9744/ced.22.2.98-104
  8. Eratodi, I. G. L. B., Awaludin, A., Han, A. L., Triwiyono, A., 2020, “Kajian dan EvaluasiStruktur Slab Prestressed Precast Modular Concrete”,Media Komunikasi Teknik Sipil, Vol. 26(1), Pp. 44-51. https://doi.org/10.14710/mkts.v26i1.27765
  9. Haryanto, Y., Hu, H.T., Han, A. L.,Hidayat, B. A., Widyaningrum, A., Yulianita, P.E., 2020, “Seismic Vulnerability Assessment Using Rapid Visual Screening: Case Study of Educational Facility Buildings of JenderalSoedirman University, Indonesia”, Civil Engineering Dimension, Vol. 22(1), Pp. 13-21. https://doi.org/10.9744/ced.22.1.13-21

Patent

  1. Wariyatno, N. G., Gan, B. S., Partono, W.,  Han, A. L.,Universitas Diponegoro, September 2020, “Metoda Kuantitatif Evaluasi Terhadap Level Intensitas Guncangan Bangunan Pada Tiap Lantai Akibat Gempa”, Paten Sederhana, S00202006543.
  2. Qomaruddin, M., Widayat., Setiadji, B. H., Han, A. L., Universitas Diponegoro, Agustus2020, “Metode Pembuatan Mortar Reclaimed Asphalt Pavement Dengan Perlakuan Awal Proses Pirolisis”, Paten Sederhana, S00202005901.
  3. Purwanto., Han, A. L.,Ekaputri, J. J., Nuroji., Universitas Diponegoro, Juli2020, “Metoda Strengthening dengan Haunch Self Compacting Geopolymer Concrete (SCGC) Pada Hubungan Balok Kolom (HBK) Beton Bertulang Dalam Sistem Rangka”, Paten Sederhana, S00202004905.